제조사 Innovatest

원산지 네덜란드(네델란드)

상품상세정보

Features

Solid fine finished C-frame

Easy to operate, also under diffuclt and harsh conditions

Tolerance of test force <0.5%

Test force is controlled by a shear pin

Two types of application: C clamp and hammer impact

Suitable for assemblies inconvenient to be taken to the lab and not allowed to be cut

Accuracy is much higher than any other type hammer impact tester

Used to test the hardness of forgings, castings, steels, nonferrous metal and its alloy products, and to test the hardness of annealed, normalizing and tempered mechanical parts.

GENERAL INFORMATION

The HB1500 Portable hardness tester is designed for the Brinell hardness test method. The test force is controlled by calibrated shear pins. After reading the diameter of the indentation with the analogue microscope, the Brinell hardness number can be obtained from the lookup table. Simple and easy to use. The HB1500 has two types of application: C clamp or hammer impact. It is possible to test small to very large specimens. The unit in particular is suitable for assemblies that are inconvenient to be taken to the lab or which cannot be cut in smaller parts.The test can be completed in any direction. The test head itself can be used as a hammer impact tester, where the shear pin will limit the applied force. Therefore its accuracy is much higher than any other type hammer impact tester. Brinell hardness testing, with a testing force of 1580kg, indentor diameter of 7.26mm, then F/D2=30. The test applied by the hydraulic HB1500 is equivalent to the standard Brinell hardness test with 3000kgf and a 10mm ball indentor. The tester can be widely used to test the hardness of forgings, castings, steel samples, nonferrous and alloyed metals. 

Technical specs

Test force 1580kg

Tolerance of test force <0.5%

Accuracy In accordance with ISO 6506

Indentor 7.26mm steel spherical surface indentor (range: 100-400HB) 

4.0mm carbide spherical surface indentor 

(Optional) (range: 400-650HB)

Opening size (H×D) 150mm×100mm

ONet weight C clamp 4.2kg

Hammer impact 0.8kg

Order details

HB1500 

Portable Brinell Hardness tester set

Standard delivery

Steel ball indentor

Flat anvil

V anvil

Brinell standard hardness block

Holding handle

Pin removal tool

Pack of shear pins (250 pieces)

Impact cylinder

Reading microscope 20x

Rubber protective caps

Carrying case

Optional accessories

Steel ball indentor

Carbide ball indentor

Brinell standard hardness block

Test head

Shear pins (a pack of 250pcs)

Hemispherical spot anvil (used for testing tubing or curled specimens)

Small flat anvil (used for testing small specimens)

40x reading microscope

3 lb hammer